On Sale! JDSU Westover HD3 Fiber Inspection System – AAATesters.com

Click for Product Info and Updated Pricing

Westover HD3 Fiber Optic Test

JDSU HD3 Display & JDSU Westover FBE Probe Inspection Fiber System
FBE-SM1

Includes Carrying Case & Accessories As Listed

HD-3 HD 3 FBP-HD3 FBP HD3

Westover HD3 HD-3 Fiber Inspection System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

HD3 Display

Key Features
– High-resolution 1.8-inch TFT LCD display that can detect 1 µm or smaller scratches and dirt particles
– Ruggedized enclosure for use in any environment
– GripSwitch™ mode activates the display when held in-hand and deactivates when released, extending battery life
– Built-in rechargeable NiMH battery pack
– Over 3-hour run time on continuous-ON mode and extended run time in GripSwitch mode
– Low-battery warning LED (illuminates when battery life is < 30 minutes)
– AC adapter (100–240 VAC/12 VDC) charges NiMH battery and also acts as alternate power supply

Applications
– View clear detailed fiber end face images on 1.8-in video display
– Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
– Promote proper fiber handling workflow and practice

HD3 Handheld Display
The HD3 display combines performance and value in a small, durable device that fits comfortably in the user’s hand. Used with JDSU fiber inspection probe microscopes, the HD3 provides a highly portable, efficient display for viewing and inspecting fiber connector end faces. With its durable design and rugged enclosure, the HD3 ensures excellent performance during field applications. It features a 1.8-inch thin film transistor (TFT) liquid crystal display (LCD) incorporated into a durable, rugged enclosure, and powered with a rechargeable NiMH battery. An innovative GripSwitch conserves battery life with instant-ON functionality when holding the unit in-hand, and it deactivates, or powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation.

Westover HD3

HD3 Display Specifications
Dimensions: 10 x 7.2 x 4.3 cm
(3.9 x 2.8 x 1.7 in)
Weight: 230 g (8.1 oz) with probe
Video display: 1.8-in (45.7 mm) TFT LCD
Connector: 4-pin Hirose for FBP probes; hardwired to FBP or FBE probes
Power source: Built-in rechargeable NiMH (nickel metal hydride), 800mAH battery or AC adapter (100–200VAC/12VDC)
Power modes: ON (continuous on)GripSwitch (power saving mode)OFF/CHARGE
Run time: ~3 hours (continuous on)Extended run time with use of GripSwitch (power saving mode)

Condition: Refurbished
Warranty: 90 Day Exchange
Included
– JDSU Westover HD3 Display & Westover FBE Probe Microscope (BC# 25334)
– FBPT-SC Connector
– FBPT-U25M Connector
– AC Adapter/Charger
– Hard Copy User Manual
– Carrying Case w/ Strap

HD3

JDSU Westover HD3 Spec Sheet

Leave a Reply

Your email address will not be published. Required fields are marked *