On Sale! Wilcom F6121 Optical Fiber Identifier OFI Probe – AAATesters.com

Click for Product Info and Updated Pricing

Wilcom F6121 Fiber Optic Test

Wilcom F6121 Telecom Optical Fiber Identifier OFI Probe

By utilizing local detection technology (non-destructive macro-bend detection which does not damage or overstress the fiber), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service

Includes Carrying Case And Accessories As Listed

F 6121 F-6121

Wilcom F6121 F-6121 Optical Fiber Identifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

The Wilcom Model F6121 Basic Optical Fiber Identifier is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a fiber. By utilizing local detection technology (non-destructive macro-bend detection which does not damage or overstress the fiber), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.

The Optical Fiber Identifier detects low frequency tones at 270 Hz, 1000 Hz and 2000 Hz. When traffic is present on the fiber under test, an audible tone can be heard as well as the traffic direction which is indicated by LEDs illuminating on the probe.

During installations, maintenance, rerouting, or restorations it is often necessary to isolate a specific fiber without disrupting service. A light source such as Wilcom’s Model FS1316 used in conjunction with the Optical Fiber Identifier can make the job a lot easier.

Wilcom F6121

The Optical Fiber Identifier includes a carrying pouch containing three easy to use field interchangeable adapter heads to accommodate; 900 µm buffered fiber, ribbon or 250µm coated fiber and 3mm jacketed fiber.

Condition: Refurbished
Warranty: 90 Day Exchange

Included:
Wilcom F6121 OFI Optical Fiber Identifier Probe (BC# 20815)
3mm Fiber Holder
250/900 Fiber Holder
Carrying Case

F6121

Wilcom F6121 Spec Sheet

On Sale! Wilcom F6121A Optical Fiber Identifier OFI Probe – AAATesters.com

Click for Product Info and Updated Pricing

Wilcom F-6121A Fiber Optic Test

Wilcom F6121A Telecom Optical Fiber Identifier OFI Probe

The Optical Fiber Identifier detects low frequency tones at 270 Hz, 1000 Hz and 2000 Hz.

Includes 250/Rib Adapter Head, 900 Adapter Head, Carrying Case & Accessories As Listed

Wilcom F6121A F-6121A Optical Fiber Identifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

SPECIFICATIONS: F6121A
Application: Basic
Relative Core Power Reading (dB): None
Insertion Loss (dB) (250µm, 1310/1550):  < 0.6 / <3.0
Detector Sensitivity (dBm, 1550 nm): -40
Fiber Type: Singlemode, 8-10µm core, 250 µm clear Acrylate coating
Spectral Response (nm): 850 to 1700
Optical Test Tone Detection: 270 Hz, 1kHz and 2kHz
Minimum Fiber Slack: 0.75” (19mm)
Power:  One 9V Alkaline Battery
Battery Life: 5,000 operations
Operating Temperature:  -20 to +50°C
Storage Temperature:  -40 to +60°C
Humidity: 0 to 90% non-condensing
Dimensions (HWD): 7.75” x 1.25” x 1.0” (197 x 32 x 25mm)
Weight: 8.0 oz (227g)

The Wilcom Model F6121A Basic Optical Fiber Identifier is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a fiber. By utilizing local detection technology (non-destructive macro-bend detection which does not damage or overstress the fiber), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.

The Optical Fiber Identifier detects low frequency tones at 270 Hz, 1000 Hz and 2000 Hz. When traffic is present on the fiber under test, an audible tone can be heard as well as the traffic direction which is indicated by LEDs illuminating on the probe.

Wilcom F-6121A

During installations, maintenance, rerouting, or restorations it is often necessary to isolate a specific fiber without disrupting service. A light source such as Wilcom’s Model FS1316 used in conjunction with the Optical Fiber Identifier can make the job a lot easier.

The Optical Fiber Identifier includes a carrying pouch containing three easy to use field interchangeable adapter heads to accommodate; 900 µm buffered fiber, ribbon or 250µm coated fiber and 3mm jacketed fiber.

Features:

Rugged Metal Case
The F6121A OFI uses the same field proven lightweight rugged metal housing as the rest of Wilcom’s Optical Fiber Identifier product line.

850nm to 1700nm Range
With the use of InGaAs detectors, the unit can be used on singlemode and multimode applications.

Audible Tone
The unit provides an audible tone in the presence of a fiber optic signal.

Tone Detection
The F6121A OFI can detect 270Hz, 1kHz and 2kHz tones for easy fiber cable identification

LED Indication
LEDs indicate tone detection, Traffic presence, Traffic Direction, and Low Battery.

Hands-Free-Operation
With an easy to use thumb lock, hands-free operation can be enabled and disabled.

Condition: Refurbished
Warranty: 90 Day Exchange

F-6121A

Included:
– Wilcom F6121A OFI Probe (BC# 16450)
– 3mm Adapter Head
– 900 Adapter Head
– 250/RIB Adapter Head
– User Manual On CD-ROM
– Carrying Case

Wilcom F6121A Spec Sheet

On Sale! Wilcom F6222 Telecom Optical Fiber Identifier OFI – AAATesters.com

Click for Product Info and Updated Pricing

Wilcom F6222 Fiber Optic Test

Wilcom F6222 Telecom Optical Fiber Identifier OFI Probe

The Optical Fiber Identifier detects low frequency test tones at 270 Hz, 1 kHz and 2kHz for locating individual fibers within a cable

By utilizing non-destructive macro-bend detection (which does not damage or overstress the fiber), these units eliminate the need to disconnect fiber connectors for traffic verification

Includes Adapter Heads, Carrying Case & Accessories As Listed

Wilcom F6222 F-6222 Optical Fiber Identifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

Wilcom F6222

SPECIFICATIONS: F6222
Application: Standard
Relative Core Power Reading (dB): +5 to -40
Insertion Loss (dB) (250µm, 1310/1550):  < 0.6 / <3.0
Detector Sensitivity (dBm, 1550 nm): -40
Fiber Type: Singlemode, 8-10µm core, 250 µm clear Acrylate coating
Spectral Response (nm): 850 to 1700
Optical Test Tone Detection: 270 Hz, 1kHz and 2kHz
Minimum Fiber Slack: 0.75” (19mm)
Power:  One 9V Alkaline Battery
Battery Life: 5,000 operations
Operating Temperature:  -20 to +50°C
Storage Temperature:  -40 to +60°C
Humidity: 0 to 90% non-condensing
Dimensions (HWD): 7.75” x 1.25” x 1.0” (197 x 32 x 25mm)
Weight: 8.0 oz (227g)

The Wilcom Model F6222 Telecom Optical Fiber Identifier is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a fiber. By utilizing local detection technology (non-destructive macro-bend detection which does not damage or overstress the fiber), this units eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.

This Optical Fiber Identifier detects low frequency tones at 270 Hz, 1000 Hz and 2000 Hz. When traffic is present on the fiber under test, an audible tone can be heard as well as the traffic direction which is indicated by LEDs illuminating on the probe.

During installations, maintenance, rerouting, or restorations it is often necessary to isolate a specific fiber without disrupting service. A light source such as Wilcom’s Model FS1316 used in conjunction with the Optical Fiber Identifiers can make the job a lot easier.

This Optical Fiber Identifier includes a carrying pouch containing three easy to use field interchangeable adapter heads to accommodate; 900 µm buffered fiber, ribbon or 250µm coated fiber and 3mm jacketed fiber.

Features

Rugged Metal Case
The OFI unit uses the same field proven lightweight rugged metal housing as the rest of Wilcom’s Optical Fiber Identifier product line.

850nm to 1700nm Range
With the use of InGaAs detectors, the unit can be used on singlemode and multimode applications.

Audible Tone
The unit provides an audible tone in the presence of a fiber optic signal.

Core Power Display
Both the F6222 OFI, and F6222C OFI can display Relative Core Power which is helpful in identifying bad connectors, splice points, etc.

LED Indication
LEDs indicate tone detection, Traffic presence, Traffic Direction, and Low Battery.

Hands-Free-Operation
With an easy to use thumb lock, hands-free operation can be enabled and disabled.

F6222

Includes:
Wilcom F6222 OFI Probe
900µm Foam Covered Adapter
250µm/Rib Foam Perimeter Adapter
3mm Slotted Adapter
User Manual On CD-ROM
Carrying Case

Wilcom F6222 Spec Sheet

On Sale! JDSU HD2-P2-V Fiber Optic Inspction System FBP-HD2 – AAATesters.com

Click for Product Info and Updated Pricing

Westover HD2-P2-V Fiber Optic Test

JDSU FBP-HD2-P2-V Fiber Inspection System w/ VFL

Please Note That No Fiber Microscope Probes Are Included In This Sale!

Quickly and easily inspect both sides of the fiber interconnect with FBP Probe FiberScope

Includes Carrying Case & Accessories As Listed

FBP HD2 HD 2 HD-2

Westover HD2-P2-V HD2P2V Fiber Inspection System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

FBP-HD2 Handheld video display with 3.5-in TFT LCD

Features
– High-resolution 3.5-inch TFT LCD display that can detect 1 µm particles and scratches
– Ruggedized, durable enclosure for use in any environment
– GripSwitch™ mode activates the display when held in-hand and deactivates it when released, extending battery life
– ~8-hour run time using continuous-ON mode and extended run time in GripSwitch mode
– Low-battery warning LED
– Uses eight AA batteries or AC adapter (100–240 VAC/12 VDC) as alternate power supply
– Available hardwired to FBP or FBE probe or connectorized to FBP probe

HD2 Handheld Display
The HD2 display combines performance and versatility in a durable device that fits comfortably in the user’s hand. Used for field inspection of optical fiber, the HD2 incorporates a variety of features that enable portability and efficiency. All models include a 3.5-inch thin film transistor (TFT) liquid crystal display (LCD) and an innovative GripSwitch that conserves battery life with instant-ON functionality when holding the unit in-hand, and powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation. With its durable design and rugged enclosure, the HD2 ensures excellent performance during field applications.

Additional features available in certain models include an integrated patch cord microscope (PCM) to inspect male connectors.

Applications
– View clear detailed fiber end face images on 3.5-in video display
– Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
– Promote proper fiber handling workflow and practice

Westover HD2-P2-V

HD2 Display Specifications
Dimensions: FBP-HD2 18.5 x 15.0 x 6.0 cm (7.3 x 5.9 x 2.4 in)
Weight
(with 8 x AA batteries): FBP-HD2: 760 g (26.8 oz)
Video display: 3.5-in (88.9 mm) TFT LCD
Connector: 4-pin Hirose™ for FBP probes; hardwired to FBP or FBE probes
Power source: 8 x AA standard alkaline batteries or AC adapter (100–240VAC/12VDC)
Power modes: ON (continuous on)
GripSwitch (power saving mode) OFF
Run time: ~8 hours (continuous on)
Extended run time with use of GripSwitch (power saving mode)

Condition: Refurbished
Warranty: 90 Day Exchange
Included
– JDSU HD2-P2-V Fiber Inspection System w/ (BC# 19686)
– VFL
– Interchangeable LC Connector
– (90) 2.5mm Connector Cleaning Swabs
– (98) 1.25mm Connector Cleaning Swabs
– AC Adapter/Charger
– User Manual On CD-ROM
– Carrying Case

HD2-P2-V

JDSU HD2-P2-V Spec Sheet

On Sale! JDSU Westover HD3 Fiber Inspection System – AAATesters.com

Click for Product Info and Updated Pricing

Westover HD3 Fiber Optic Test

JDSU HD3 Display & JDSU Westover FBE Probe Inspection Fiber System
FBE-SM1

Includes Carrying Case & Accessories As Listed

HD-3 HD 3 FBP-HD3 FBP HD3

Westover HD3 HD-3 Fiber Inspection System Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

HD3 Display

Key Features
– High-resolution 1.8-inch TFT LCD display that can detect 1 µm or smaller scratches and dirt particles
– Ruggedized enclosure for use in any environment
– GripSwitch™ mode activates the display when held in-hand and deactivates when released, extending battery life
– Built-in rechargeable NiMH battery pack
– Over 3-hour run time on continuous-ON mode and extended run time in GripSwitch mode
– Low-battery warning LED (illuminates when battery life is < 30 minutes)
– AC adapter (100–240 VAC/12 VDC) charges NiMH battery and also acts as alternate power supply

Applications
– View clear detailed fiber end face images on 1.8-in video display
– Use with JDSU probe microscope to inspect both bulkhead (female) and patch cord (male) sides of fiber interconnect
– Promote proper fiber handling workflow and practice

HD3 Handheld Display
The HD3 display combines performance and value in a small, durable device that fits comfortably in the user’s hand. Used with JDSU fiber inspection probe microscopes, the HD3 provides a highly portable, efficient display for viewing and inspecting fiber connector end faces. With its durable design and rugged enclosure, the HD3 ensures excellent performance during field applications. It features a 1.8-inch thin film transistor (TFT) liquid crystal display (LCD) incorporated into a durable, rugged enclosure, and powered with a rechargeable NiMH battery. An innovative GripSwitch conserves battery life with instant-ON functionality when holding the unit in-hand, and it deactivates, or powers OFF when set down. It is equipped with a continuous-ON feature for hands-free operation.

Westover HD3

HD3 Display Specifications
Dimensions: 10 x 7.2 x 4.3 cm
(3.9 x 2.8 x 1.7 in)
Weight: 230 g (8.1 oz) with probe
Video display: 1.8-in (45.7 mm) TFT LCD
Connector: 4-pin Hirose for FBP probes; hardwired to FBP or FBE probes
Power source: Built-in rechargeable NiMH (nickel metal hydride), 800mAH battery or AC adapter (100–200VAC/12VDC)
Power modes: ON (continuous on)GripSwitch (power saving mode)OFF/CHARGE
Run time: ~3 hours (continuous on)Extended run time with use of GripSwitch (power saving mode)

Condition: Refurbished
Warranty: 90 Day Exchange
Included
– JDSU Westover HD3 Display & Westover FBE Probe Microscope (BC# 25334)
– FBPT-SC Connector
– FBPT-U25M Connector
– AC Adapter/Charger
– Hard Copy User Manual
– Carrying Case w/ Strap

HD3

JDSU Westover HD3 Spec Sheet

On Sale! JDSU Westover P5000 Fiber Optic USB Fiberscope – AAATesters.com

Click for Product Info and Updated Pricing

Westover P5000 Fiber Optic Test

JDSU P5000 Fiber Optic Microscope

The P5000 digital probe microscope connects directly to a PC or laptop via a USB 2.0 connection

Includes Carrying Case & Accessories As Listed

P-5000 P 5000

Westover P5000 P-5000 Fiber USB Microscope Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

JDSU Westover P5000 Fiber Optic Microscope
FiberChek2 is an advanced application that determines the acceptability of optical fiber end faces through automated inspection and analysis. It identifies and characterizes defects and contamination and determines their location relative to the fiber core. It then provides a PASS or FAIL result according to a pre-configured failure criteria setting.

The P5000 digital probe microscope connects directly to a PC or laptop via a USB 2.0 connection, and the unique QuickCaptureTM button lets users capture, inspects, and analyzes a fiber end face image in a single automated step.

As different types of contamination are located and identified, FiberChek2 measures the size of each feature, determines its location relative to the core, and analyzes the collected data using an advanced logarithm to obtain a PASS or FAIL result based on parameters configured for each pre-defined setting.

Because defects and contamination on or near the core surface typically affect the light transmission most significantly, they require the most aggressive examination. FiberChek2 defines the concentric areas around the core as Zones which let users establish failure criteria by evaluating various defect categories, which include Contamination, Pit/Chip and Scratches.

Westover P5000

Features:
– FiberChek2 software pre-programmed to comply with International Electrotechnical Commission (IEC) acceptance criteria standards for single-mode and multimode connectors
– Implements standards for inspection and grading throughout every stage of fiber handling
– Remove human subjectivity from fiber inspection and grading to ensure consistent results
– Configurability allows for user-defined controls and criteria settings
– Identify and characterize each defect and contamination particle, and determines their location relative to the fiber core
– Archive results and images as HTML or PDF files and generate integrated reports
– Plug it directly into PC/laptop via USB 2.0 connection
– Produce crisp, clear view of fiber end face condition with high resolution 5MP camera and coaxial illumination

Specifications:
Dimensions: 140 x 46 x 44 mm (5.5 x 1.8 x 1.7 in)
Weight: 110 g (3.88 oz)
LOW-Mag field-of-view (FOV): Horizontal: 740 µm
Vertical: 550 µm
Diagonal: 920 µm
HIGH-Mag FOV: Horizontal: 460 µm
Vertical: 345 µm
Diagonal: 575 µm
Live image: 800 x 600; 15 fps
Connector: USB 2.0 (with latch lock)
Cord length: 183 cm (6 ft)
Camera sensor: 1280 x 1024 black and white, 1/3-in (1.27 cm) CMOS
Particle size detection: Light source: Blue LED, 100,000+ hour life
Lighting technique: Coaxial
Power source: USB port
Certification: CE

Condition: Refurbished
Warranty: 90 Day Exchange
Included
– JDSU P5000 Fiber Optic Fiberscope (BC# 16409M)
– FBPT-U12M Adapter
– FiberChek Pro Software
– User Manual On CD-ROM
– Carrying Case (G)

P5000

JDSU Westover P5000 Spec Sheet

On Sale! Westover FBP FiberChek FiberScope FBPP-USB1 USB – AAATesters.com

Click for Product Info and Updated Pricing

Westover FBPP-USB1 Fiber Optic Test

FBPP-USB1 Digital Converter And Probe Kit

Key Features:
– View clear fiber end face images quickly and easily for detailed visual inspection of contamination
– Compact design for efficiency and portability with easy one-hand operation
– FBP probe is compatible with over 250 FBPT precision tips and adapters to inspect every connector and application
– Use FiberChek™ softwarewith a PC/laptop for one-button capture and analysis of fiber end faces

Applications
– Usewith JDSU test platforms or PC/laptop via a USB connection to visually inspect fiber end faces
– Quickly and easily inspect both bulkhead (female) and patch cord (male)sides of fiber interconnects
– Promote proper fiber handling workflow and practice

The USB 1.1 converteris an upgrade kit for use with FBP-series probes and includes the basic FiberChek software. It lets users quickly and easily view, capture,save, and print images of fiber end faces. It features an image capture button to conveniently and instantly capture fiber end face images on screen.

FBP Video Probe Microscope
The FBP video probe microscope, in single or dual-magnification (200/400X), isthe essential inspection tool for use with JDSU test platforms. The key components of the probe include an integrated lightsource, a 1/3-inch complimentary metal oxide semiconductor(CMOS) video camera, a focusing mechanism, and an optional image capture button. It is powered through the universal serial bus (USB) port and utilizes a blue coaxial light emitting diode (LED) light source with an advanced camera system to produce a high resolution fiber end face image. It fits and operates comfortably and easily in-hand, letting users inspect hard-to-reach connectors that are installed on the backside of patch panels or inside optical devices. The focus control is conveniently located on the probe to easily adjust the focus of the fiberimage,while the optional dual-magnification control lets users quickly change between high- and low-magnification views.

Analog-to-Digital Overview
The FBP probe microscope connects to the JDSU optical test platforms or to a PC/ laptop via a USB digital converter. Simply connect the FBP probe to the module and plug theUSB connection in an open USB port. The USB module , like the probe,offers an optional QuickCapture™ button to instantly capture thefiber endface imageonthe display. For use with a PC/laptop, a fiber analysis program (FiberChek) is included on a CD and requires software/hardware installation. No additional software is needed to interface with these JDSU test platforms: T-BERD, MTS, or TestPad.

TheUSB analog-to-digital converter is available in either a 4-pin or 6-pin configuration. The FBPP-USB3 connects to a standard 4-pin FBP probe, while the FBPP-USB1 model connects to a 6-pin FBP probe equipped with an integrated QuickCapture™ button used to instantly capture fiber end face images.

Westover FBPP-USB1

USB Converter Specifications
Dimensions: 150 x 580 x 180 mm (5.9 x 22.8 x 7.1 in) with 3-ft USB cable
Weight: 80 g (2.8 oz)
Power: 5V, 500mA from USB port
USB type: USB 1.1
Compatible test platform/devices: T-BERD 6000, T-BERD 8000, FST-2802, FST-2310, and other test units with a USB port; Windows®-based PC or laptop

Condition: Refurbished
Warranty: 90 Day Exchange
Included
– Westover FBP FiberChek Probe (BC# 15832M)
– Westover USB Analog-To-Digital Converter P/N: ZP-EMD-90036
– FBPT-U25MA Probe Connector
– FBPT-SC-APC Probe Connector
– FBPT-U12M Probe Connector
– FBPT-FC Probe Connector
– FBPT-LC Probe Connector
– FBPT-SC Probe Connector
– Case For Connector
– IBC Brand Cleaner SC
– FCC2 Fiber Connector Cleaner
– FiberChek Quick Start Guide
– FiberChek Pro Software
– Dry Wipes
– User Manual On CD-ROM
– Carrying Case w/ Strap

FBPP-USB1

Westover FBP Spec Sheet